Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain, durable and long-lasting. They don't get rotten or rusty like aluminum and timber.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will help prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home, and could even be fatal. It is crucial to take the time to ensure that you're doing all you can to ensure that your windows are in good repair.

Single-pane windows are relatively easy to replace and generally fit into frames that were previously in use very easily. However when you have double-pane windows that are held in place by internal beading, it will be more difficult to remove the existing panes and install new ones. In this situation, you will need to locate some plastic spacers that will help the new pane to fit perfectly into the window frame.

If you plan to try to remove the glass panes yourself it is crucial to wear appropriate safety gear that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a drop cloth prior to when you begin working on the glass to ensure that any fragments of glass fall onto the cloth instead of landing on the floor where they can be trodden under and cause further damage.

Once the glass has been removed from the window, it's best to cover the gap with packaging tape or duct tape to prevent drafts and water from entering the property until a professional is able to come out and repair the window. It also acts as a barrier, preventing any intruders from getting access to your home. If the distance between the window and the door is substantial, you may want to use a security screen that also has an opening. This will provide the best of both.

2. Sagging

Upvc windows and doors are an affordable, durable and energy-efficient alternative to timber sash windows. As time passes, they may develop a number of problems that include sliding. A sagging uPVC windows can cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from getting worse.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to unblock the windows so you can reach the frame. Then, using a screwdriver, you can unscrew the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you have moved your hinges. If you're satisfied with the fit of your window, you can tighten screws to keep them in place.

If you cannot reposition the hinges, you might have to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, causing them to loosen. It is essential to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. This is usually due to screws that have become undone over time, but it could be caused by the handle mechanism wearing out. It's fairly simple to repair a loose uPVC handle. The first step is to close your window and do an experiment fit. The corner joints of the sash should align with the casing joint. If it doesn't you can use a screwdriver to loosen up the handle. Then, turn the mechanism to position.

3. Water Leaks

If you wake up to wet floors and damp walls every time it rains it's crucial to take action. Water leaks through windows can cause structural damage to your home and also impact your ability to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix and should be undertaken by any skilled DIYer. Based on the severity of the issue the caulking that was used up may require removal before a new layer is applied. When it comes to uPVC repair, you must avoid over-caulking. This will only make your window more difficult to clean and lower its energy efficiency.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more serious cases you may need to think about replacing the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. This is a fungus that thrives in damp conditions and can quickly spread across the home.

If the leakage occurs between the double-glazed glass it is more likely that the problem is with the seal than the frame. This can be easily repaired by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open, or if it opens with an ease. They can be replaced by any competent DIYer and can usually be done within a few minutes.

Like any mechanical component hinges are prone to be damaged over time. It's easy to change a window hinge however it is simpler if you have someone to help you to hold the frame.

Verify that the uPVC hinges open and close in the proper direction. Look for the arrows that are on each hinge to determine which direction the window should be upvc door repair opened.

The issue could be caused by opening the window improperly or due to a poor installation at the factory. Sending us a photo via our website is often enough to resolve the problem. We are always happy to offer suggestions.

Regular lubrication of the hinges is also necessary. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. Ideally, you should do this at least once a year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different factors. The hinges, also due to wear and tear can become misaligned, this can cause an opening to appear where the sash meets the frame. This can be easily repaired by giving them thorough clean, however if they are beyond repair it might be necessary to have them aligned or replaced. Secondly the interlock, this is located on the hinge of the window, may also be misaligned, and again it is possible to just give them a good clean, but in some cases it might be necessary to have these replaced.

The second most frequent reason for draughts are the window seals. These can become worn down or damaged over time, and let air escape through the gaps. Installing high-quality weatherstripping will help to prevent draughts. Another option is to replace the upvc window with low-emissivity glass. this will help to regulate indoor temperatures and will reduce the possibility of draughts.

One of the most effective methods to reduce the draughts in your home is to use a draught excluder, these are typically made of fabric filled with some type of filler. They can be put on the top of your windowsill. These will keep your home warm by blocking cold air.

With a bit of regular maintenance and repairs windows made of upvc will provide a great level of security and insulation for your home. It is crucial to realize that all windows have a lifespan and they may reach an point at which it is more cost-effective to replace them rather than repair them. If you are experiencing issues with your upvc window you should consult a professional as soon as you can.